AZ-103 pdf dumps

[2020.5.8] Microsoft Azure certification journey easier: Practicing with AZ-103 Exam Dumps

To make your Microsoft Azure certification journey easier and more fun, you can use the Pass4itsure website and its most effective and up-to-date exam dump to prepare you for the AZ-103 test. https://www.pass4itsure.com/az-103.html Therefore, please do not delay the opportunity to obtain certification and build a dream career!

Microsoft Azure certification AZ-103 Pdf Dumps https://drive.google.com/open?id=19Coh2duUHRtgWifZBcT7r4fcTnagcS_a

Microsoft Azure AZ-103: What Is It?

Microsoft Azure AZ-103 is one of the most popular certificates in Microsoft. After completing the exam, you will get an Azure certification. Get a good position, you can earn about 74,000 US dollars per year.

All You Need to Know About Microsoft Azure AZ-103 Practice Question

QUESTION 1
You need to configure the Azure ExpressRoute circuits.
How should you configure Azure ExpressRoute routing? To answer, drag the appropriate configurations to the correct
locations. Each configuration may be used once, more than once, or not at all.
You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Alnaba AZ-103 exam questions-q1

Correct Answer:

Alnaba AZ-103 exam questions-q1-2

QUESTION 2
You have an Azure subscription that contains 10 virtual machines. You need to ensure that you receive an email
message when any virtual machines are powered off, restarted, or deallocated. What is the minimum number of rules
and action groups that you require?
A. three rules and three action groups
B. one rule and one action group
C. three rules and one action group
D. one rule and three action groups
Correct Answer: C
An action group is a collection of notification preferences defined by the user. Azure Monitor and Service
Health alerts are configured to use a specific action group when the alert is triggered. Various alerts may use the same
action group or different action groups depending on the user\\’s requirements.
References: https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/monitoring-action-groups

QUESTION 3
You have a public load balancer that balancer ports 80 and 443 across three virtual machines.
You need to direct all the Remote Desktop protocol (RDP) to VM3 only.
What should you configure?
A. an inbound NAT rule
B. a load public balancing rule
C. a new public load balancer for VM3
D. a new IP configuration
Correct Answer: A
To port forward traffic to a specific port on specific VMs use an inbound network address translation (NAT) rule.
Incorrect Answers:
B: Load-balancing rule to distribute traffic that arrives at frontend to backend pool instances.
References: https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview

QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1
contains resources that were deployed by using templates. You need to view the date and time when the resources
were
created in RG1.
Solution: From the RG1 blade, you click Deployments.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A

QUESTION 5
You need to recommend a solution for App1. The solution must meet the technical requirements.
What should you include in the recommendation? To answer, select the appropriate options in the answer area;
NOTE: Each correct selection is worth one point.
Hot Area:

Alnaba AZ-103 exam questions-q5

Correct Answer:

Alnaba AZ-103 exam questions-q5-2

This reference architecture shows how to deploy VMs and a virtual network configured for an N-tier application, using
SQL Server on Windows for the data tier.

Alnaba AZ-103 exam questions-q5-3

Scenario: You have a public-facing application named App1. App1 is comprised of the following three tiers:
A SQL database
A web front end
A processing middle tier
Each tier is comprised of five virtual machines. Users access the web front end by using HTTPS only.
Technical requirements include:
Move all the virtual machines for App1 to Azure.
Minimize the number of open ports between the App1 tiers.
References: https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/n-tier/n-tier-sql-server

QUESTION 6
You are the global administrator for an Azure Active Directory (Azure AD) tenet named adatum.com.
You need to enable two-step verification for Azure users.
What should you do?
A. Create a sign-in risk policy in Azure AD Identity Protection
B. Enable Azure AD Privileged Identity Management.
C. Create and configure the Identity Hub.
D. Configure a security policy in Azure Security Center.
Correct Answer: A
With Azure Active Directory Identity Protection, you can: require users to register for multi-factor authentication handle
risky sign-ins and compromised users
References: https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/flows

QUESTION 7
You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different
Azure AD tenant.
Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine named VM1 and has
an IP address space of 10.0.0.0/16.
Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has
an IP address space of 10.10.0.0/24.
You need to connect VNet1 to VNet2.
What should you do first?
A. Move VNet1 to Subscription2.
B. Modify the IP address space of VNet2.
C. Provision virtual network gateways.
D. Move VM1 to Subscription2.
Correct Answer: C
The virtual networks can be in the same or different regions, and from the same or different subscriptions. When
connecting VNets from different subscriptions, the subscriptions do not need to be associated with the same Active
Directory
tenant.
Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual network to another
virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to creating a Site-to-Site IPsec
connection
to an on-premises location. Both connectivity types use a VPN gateway to provide a secure tunnel using IPsec/IKE, and
both function the same way when communicating.
The local network gateway for each VNet treats the other VNet as a local site. This lets you specify additional address
space for the local network gateway in order to route traffic.
References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-resource-managerportal

QUESTION 8
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com that contains 100 user
accounts.
You purchase 10 Azure AD Premium P2 licenses for the tenant.
You need to ensure that 10 users can use all the Azure AD Premium features.
What should you do?
A. From the Groups blade of each user, invite the users to a group.
B. From the Licenses blade of Azure AD, assign a license.
C. From the Directory role blade of each user, modify the directory role.
D. From the Azure AD domain, add an enterprise application.
Correct Answer: B
To assign a license, under Azure Active Directory > Licenses > All Products, select one or more products, and then
select Assign on the command bar.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/license-users-groups

QUESTION 9
You have a computer named Computer1 that has a point-to-site VPN connection to an Azure virtual network named
VNet1. The point-to-site connection uses a self-signed certificate. From Azure, you download and install the VPN client
configuration package on a computer named Computer2.
You need to ensure that you can establish a point-to-site VPN connection to VNet1 from Computer2. Solution: You join
Computer2 to Azure Active Directory (Azure AD).
Does this meet this goal?
A. Yes
B. No
Correct Answer: B

QUESTION 10
You have an Azure subscription that contains an Azure file share.
You have an on-premises server named Server1 that runs Windows Server 2016.
You plan to set up Azure File Sync between Server1 and the Azure file share.
You need to prepare the subscription for the planned Azure File Sync.
Which two actions should you perform in the Azure subscription? To answer, drag the appropriate actions to the correct
targets. Each action may be used once, more than once, or not at all. You may need to drag the split bar between
panes
or scroll to view content.
Select and Place:

Alnaba AZ-103 exam questions-q10

Correct Answer:

Alnaba AZ-103 exam questions-q10-2

First action: Create a Storage Sync Service
The deployment of Azure File Sync starts with placing a Storage Sync Service resource into a resource group of your
selected subscription.
Second action: Run Server Registration
Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server (or
cluster) and the Storage Sync Service. A server can only be registered to one Storage Sync Service and can sync with
other servers and Azure file shares associated with the same Storage Sync Service.
The Server Registration UI should open automatically after installation of the Azure File Sync agent.

Alnaba AZ-103 exam questions-q10-3

QUESTION 11
You have an Azure subscription that contains three virtual networks named VNet1, VNet2, VNet3.
VNet2 contains a virtual appliance named VM2 that operates as a router. You are configuring the virtual networks in a
hub and spoke topology that uses VNet2 as the hub network.
You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3. You need to provide
connectivity between VNet1 and VNet3 through VNet2.
Which two configurations should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. On the peering connections, allow forwarded traffic.
B. On the peering connections, allow gateway transit.
C. Create route tables and assign the table to subnets.
D. Create a route filter.
E. On the peering connections, use remote gateways.
Correct Answer: BE
Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual network and want to
allow traffic from the peered virtual network to flow through the gateway. The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering#requirements-and-constraints

QUESTION 12
You have two Azure virtual machines named VM1 and VM2. VM1 has a single data disk named Disk1. You need to
attach Disk1 to VM2. The solution must minimize downtime for both virtual machines. Which four actions should you
perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange
them in the correct order.
Select and Place:

Alnaba AZ-103 exam questions-q12

Correct Answer:

Alnaba AZ-103 exam questions-q12-2

Step 1: Stop VM1.
Step 2: Detach Disk1 from VM1.
Step 3: Start VM1.
Detach a data disk using the portal
1.
In the left menu, select Virtual Machines.
2.
Select the virtual machine that has the data disk you want to detach and click Stop to deallocate the VM.
3.
In the virtual machine pane, select Disks.
4.
At the top of the Disks pane, select Edit.
5.
In the Disks pane, to the far right of the data disk that you would like to detach, click the Detach button image detach
button.
6.
After the disk has been removed, click Save on the top of the pane.
7.
In the virtual machine pane, click Overview and then click the Start button at the top of the pane to restart the VM.
8.
The disk stays in storage but is no longer attached to a virtual machine.
Step 4: Attach Disk1 to VM2
Attach an existing disk
Follow these steps to reattach an existing available data disk to a running VM.
9.
Select a running VM for which you want to reattach a data disk.
10.From the menu on the left, select Disks.
11. Select Attach existing to attach an available data disk to the VM.
12.From the Attach existing disk pane, select OK.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/detach-disk
https://docs.microsoft.com/en-us/azure/lab-services/devtest-lab-attach-detach-data-disk

QUESTION 13
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While
most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste,
ability
to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn\\’t matter how you
accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and
this
exam may have more than one lab that you must complete. You can use as much time as you would like to complete
each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all
other
sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to
the lab.
To start the lab
You may start the lab by clicking the Next button.
You plan to host several secured websites on Web01.
You need to allow HTTPS over TCP port 443 to Web01 and to prevent HTTP over TCP port 80 to Web01.
What should you do from the Azure portal?
A. Answer: See below.
Correct Answer: A
You can filter network traffic to and from Azure resources in an Azure virtual network with a network security group. A
network security group contains security rules that allow or deny inbound network traffic to, or outbound network traffic
from,
several types of Azure resources. A network security group contains security rules that allow or deny inbound network
traffic to, or outbound network traffic from, several types of Azure resources.
Step A: Create a network security group
A1. Search for and select the resource group for the VM, choose Add, then search for and select Network security
group.
A2. Select Create.

Alnaba AZ-103 exam questions-q13

The Create network security group window opens.
A3. Create a network security group
Enter a name for your network security group.
Select or create a resource group, then select a location.
A4. Select Create to create the network security group.
Step B: Create an inbound security rule to allows HTTPS over TCP port 443 B1. Select your new network security
group.
B2. Select Inbound security rules, then select Add.
B3. Add inbound rule
B4. Select Advanced.
From the drop-down menu, select HTTPS.
You can also verify by clicking Custom and selecting TCP port, and 443.
B5. Select Add to create the rule.
Repeat step B2-B5 to deny TCP port 80
B6. Select Inbound security rules, then select Add.
B7. Add inbound rule
B8. Select Advanced.
Clicking Custom and selecting TCP port, and 80.
B9. Select Deny.
Step C: Associate your network security group with a subnet
Your final step is to associate your network security group with a subnet or a specific network interface.
C1. In the Search resources, services, and docs box at the top of the portal, begin typing Web01.
When the Web01 VM appears in the search results, select it.
C2. Under SETTINGS, select Networking. Select Configure the application security groups, select the Security Group
you created in Step A, and then select Save, as shown in the following picture:

Alnaba AZ-103 exam questions-q13-2

Latest Microsoft Azure AZ-103 dumps Practice test Questions and answers

https://youtu.be/nVe4EVjf-ak

Pass4itsure offers exclusive discounts 12%

Pass4itsure-discount-code-2020

Free download Azure AZ-103 Pdf Dumps

[2020 Free] AZ-103 Pdf Dumps https://drive.google.com/open?id=19Coh2duUHRtgWifZBcT7r4fcTnagcS_a \

Want to pass the AZ-103 exam happily? You need to make choices, https://www.pass4itsure.com/az-103.html use AZ-103 practice tests and other resources (AZ-103 dumps) for effective preparation, and expand your career opportunities!

[2020.3.30] Share Microsoft az-103 dumps and az-103 pdf for preparation AZ-103 exam

Please take a moment to read alnaba’s blog, where the Microsoft Azure Administrator Exam AZ-103 dumps update is released below.Microsoft az-103 dumps are essential for exams https://www.pass4itsure.com/az-103.html Updated: Mar 25, 2020,Very much useful for your exam preparation.You can Google for “AZ-103 study guide” for additional content.

Starting on May 1, 2019, you only need to pass Exam AZ-103 to earn this certification. This new exam combines the skills covered in AZ-100 and AZ-101 (which retired on May 1, 2019), with the majority of the new exam coming from AZ-100.

Microsoft certification other dumps you might be interested in!

View https://docs.microsoft.com/en-us/learn/certifications/exams/az-103

General comments regarding the Pass4itsure AZ-103

Thanks god and thank you all. 100% valid. all the other questions are included in this file.

Very good study material, I just passed my exam with the help of it. Good luck to you.

This dump is enough to pass exam.There are many new questions and some modified questions.Good luck to you all.

Many questions are from the dumps but few question changed. Need to be attention.

There are many new questions in the dump and the answers are accurate and correct. I finished my exam with high score this morning, thanks very much.

Preparation AZ-103 exam video

https://youtu.be/nVe4EVjf-ak

AZ-103 Microsoft Azure Administrator Practice Test Questions | free

QUESTION 1
You need to the appropriate sizes for the Azure virtual for Server2.
What should you do? To answer, select the appropriate options in the answer area;
NOTE: Each correct selection is worth one point.
Hot Area:

Pass4itsure AZ-103 exam questions-q1

Correct Answer:

Pass4itsure AZ-103 exam questions-q1-2

Box 1: Create a Recovery Services vault
Create a Recovery Services vault on the Azure Portal.
Box 2: Install the Azure Site Recovery Provider
Azure Site Recovery can be used to manage migration of on-premises machines to Azure.
Scenario: Migrate the virtual machines hosted on Server1 and Server2 to Azure.
Server2 has the Hyper-V host role.
References:
https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure

QUESTION 2
You are creating an Azure load balancer.
You need to add an IPv6 load balancing rule to the load balancer.
How should you complete the Azure PowerShell script? To answer, select the appropriate options in the answer are
Hot Area:

Pass4itsure AZ-103 exam questions-q2

Correct Answer:

Pass4itsure AZ-103 exam questions-q2-2

QUESTION 3
You are developing an Azure web app named WebApp1. WebApp1 uses an Azure App Service plan named Plan1 that
uses the B1 pricing tier.
You need to configure WebApp1 to add additional instances of the app when CPU usage exceeds 70 percent for 10
minutes.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:

Pass4itsure AZ-103 exam questions-q3

Correct Answer:

Pass4itsure AZ-103 exam questions-q3-2

Box 1: From the Scale out (App Service Plan) settings blade, change the pricing tier The B1 pricing tier only allows for 1
core. We must choose another pricing tier. Box 2: From the Scale out (App Service Plan) settings blade, enable
autoscale
1.
Log in to the Azure portal at http://portal.azure.com
2.
Navigate to the App Service you would like to autoscale.
3.
Select Scale out (App Service plan) from the menu
4.
Click on Enable autoscale. This activates the editor for scaling rules.

Pass4itsure AZ-103 exam questions-q3-3

Box 3: From the Scale mode to Scale based on metric, add a rule, and set the instance limits. Click on Add a rule. This
shows a form where you can create a rule and specify details of the scaling.
References: https://azure.microsoft.com/en-us/pricing/details/app-service/windows/
https://blogs.msdn.microsoft.com/hsirtl/2017/07/03/autoscaling-azure-web-apps/

QUESTION 4
You have an Azure subscription that contains several virtual machines and an Azure Log Analytics workspace named
Workspace1. You create a log search query as shown in the following exhibit.

Pass4itsure AZ-103 exam questions-q4

Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic. NOTE: Each correct selection is worth one point.
Hot Area:

Pass4itsure AZ-103 exam questions-q4-2

Correct Answer:

Pass4itsure AZ-103 exam questions-q4-3

Box 1: 14 days
Two weeks will be covered.
Note: Startofweek returns the start of the week containing the date, shifted by an offset, if provided.
Start of the week is considered to be a Sunday.
Endofweek returns the end of the week containing the date, shifted by an offset, if provided.
Last day of the week is considered to be a Saturday.
Box 2:
The render operator renders results in as graphical output. Timechart is a Line graph, where the first column is x-axis,
and should be datetime. Other columns are y-axes. In this case the Y axis has avg(CounterValue) Values.
References:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/log-query-overview
https://docs-analytics-eus.azurewebsites.net/queryLanguage/query_language_renderoperator.html

QUESTION 5
You have an Azure subscription named Subscription1.
You have 5 TB of data that you need to transfer to Subscription.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?
A. Azure SQL Database
B. Azure Data Factory
C. A virtual machine
D. Azure Blob storage
Correct Answer: D
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service

QUESTION 6
You have an Azure subscription that contains two virtual networks named VNet1 and VNet2. Virtual machines connect
to the virtual networks. The virtual networks have the address spaces and the subnets configured as shown in the
following table.

Pass4itsure AZ-103 exam questions-q6

You need to add the address space of 10.33.0.0/16 to VNet1. The solution must ensure that the hosts on VNet1 and
VNet2 can communicate.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:

Pass4itsure AZ-103 exam questions-q6-2

Correct Answer:

Pass4itsure AZ-103 exam questions-q6-3

Step 1: Remove peering between Vnet1 and VNet2.
You can\\’t add address ranges to, or delete address ranges from a virtual network\\’s address space once a virtual
network is peered with another virtual network. To add or remove address ranges, delete the peering, add or remove the
address ranges, then re-create the peering.
Step 2: Add the 10.44.0.0/16 address space to VNet1.
Step 3: Recreate peering between VNet1 and VNet2
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering

QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1
contains resources that were deployed by using templates. You need to view the date and time when the resources
were
created in RG1. Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic
deployment.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 8
You have 100 Azure subscriptions. All the subscriptions are associated to the same Azure Active Directory (Azure AD)
tenant named contoso.com.
You are a global administrator.
You plan to create a report that lists all the resources across all the subscriptions. You need to ensure that you can view
all the resources in all the subscriptions.
What should you do?
A. From the Azure portal, modify the profile settings of your account.
B. From Windows PowerShell, run the Add-AzureADAdministrativeUnitMember cmdlet.
C. From Windows PowerShell, run the New-AzureADUserAppRoleAssignment cmdlet.
D. From the Azure portal, modify the properties of the Azure AD tenant.
Correct Answer: C
The New-AzureADUserAppRoleAssignment cmdlet assigns a user to an application role in Azure Active Directory (AD).
Use it for the application report.
References: https://docs.microsoft.com/en-us/powershell/module/azuread/newazureaduserapproleassignment?view=azureadps-2.0

QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1
contains resources that were deployed by using templates. You need to view the date and time when the resources
were
created in RG1.
Solution: From the RG1 blade, you click Automation script.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 10
You are the global administrator for an Azure Active Directory (Azure AD) tenet named adatum.com.
You need to enable two-step verification for Azure users.
What should you do?
A. Create a sign-in risk policy in Azure AD Identity Protection
B. Enable Azure AD Privileged Identity Management.
C. Create and configure the Identity Hub.
D. Configure a security policy in Azure Security Center.
Correct Answer: A
With Azure Active Directory Identity Protection, you can: require users to register for multi-factor authentication handle
risky sign-ins and compromised users
References: https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/flows

QUESTION 11
You have an on-premises network that includes a Microsoft SQL Server instance named SQL1.
You create an Azure Logic App named App1.
You need to ensure that App1 can query a database on SQL1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:

Pass4itsure AZ-103 exam questions-q11

Correct Answer:

Pass4itsure AZ-103 exam questions-q11-2

To access data sources on premises from your logic apps, you can create a data gateway resource in Azure so that
your logic apps can use the on-premises connectors. Box 1: From an on-premises computer, install an on-premises
data gateway. Before you can connect to on-premises data sources from Azure Logic Apps, download and install the onpremises data gateway on a local computer. Box 2: From the Azure portal, create an on-premises data gateway Create
Azure resource for gateway After you install the gateway on a local computer, you can then create an Azure resource
for your gateway. This step also associates your gateway resource with your Azure subscription.
1.
Sign in to the Azure portal. Make sure you use the same Azure work or school email address used to install the
gateway.
2.
On the main Azure menu, select Create a resource > Integration > On-premises data gateway.
3.
On the Create connection gateway page, provide this information for your gateway resource.
4.
To add the gateway resource to your Azure dashboard, select Pin to dashboard. When you\\’re done, choose Create.
Box 3: From the Logic Apps Designer in the Azure portal, add a connector After you create your gateway resource and
associate your Azure subscription with this resource, you can now create a connection between your logic app and your
on-premises data source by using the gateway.
5.
In the Azure portal, create or open your logic app in the Logic App Designer.
6.
Add a connector that supports on-premises connections, for example, SQL Server.
7.
Set up your connection.

Pass4itsure AZ-103 exam questions-q11-3

References: https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-gateway-connection

QUESTION 12
Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New
York.
The Montreal office has 2,000 employees. The Seattle office has 1,000 employees. The New York office has 200
employees.
All the resources used by Contoso are hosted on-premises.
Contoso creates a new Azure subscription. The Azure Active Directory (Azure AD) tenant uses a domain named
contoso.onmicrosoft.com. The tenant uses the P1 pricing tier.
Existing Environment
The network contains an Active Directory forest named contoso.com. All domain controllers are configured as DNS
servers and host the contoso.com DNS zone.
Contoso has finance, human resources, sales, research, and information technology departments. Each department
has an organizational unit (OU) that contains all the accounts of that respective department. All the user accounts have
the
department attribute set to their respective department.
New users are added frequently.
Contoso.com contains a user named User1.
All the offices connect by using private links.
Contoso has data centers in the Montreal and Seattle offices. Each data center has a firewall that can be configured as
a VPN device.
All infrastructure servers are virtualized. The virtualization environment contains the servers in the following table.

Pass4itsure AZ-103 exam questions-q12

Contoso uses two web applications named App1 and App2. Each instance on each web application requires 1GB of
memory. The Azure subscription contains the resources in the following table.

Pass4itsure AZ-103 exam questions-q12-2

The network security team implements several network security groups (NSGs).
Planned Changes
Contoso plans to implement the following changes:
Deploy Azure ExpressRoute to the Montreal office.
Migrate the virtual machines hosted on Server1 and Server2 to Azure.
Synchronize on-premises Active Directory to Azure Active Directory (Azure AD).
Migrate App1 and App2 to two Azure web apps named webApp1 and WebApp2.
Technical requirements
Contoso must meet the following technical requirements:
Ensure that WebApp1 can adjust the number of instances automatically based on the load and can scale up to five
instance*.
AZ-103 Practice Test | AZ-103 Study Guide | AZ-103 Braindumps 15 / 19
https://www.pass4itsure.com/az-103.html
2019 Latest pass4itsure AZ-103 PDF and VCE dumps Download
Ensure that VM3 can establish outbound connections over TCP port 8080 to the applications servers in the Montreal
office.
Ensure that routing information is exchanged automatically between Azure and the routers in the Montreal office.
Enable Azure Multi-Factor Authentication (MFA) for the users in the finance department only.
Ensure that webapp2.azurewebsites.net can be accessed by using the name app2.contoso.com.
Connect the New Your office to VNet1 over the Internet by using an encrypted connection.
Create a workflow to send an email message when the settings of VM4 are modified.
Cre3te a custom Azure role named Role1 that is based on the Reader role.
Minimize costs whenever possible.
You discover that VM3 does NOT meet the technical requirements.
You need to define a custom domain name for Azure AD to support the planned infrastructure.
Which domain name should you use?
A. Join the client computers in the Miami office to Azure AD.
B. Add http://autologon.microsoftazuread-sso.com to the intranet zone of each client computer in the Miami office.
C. Allow inbound TCP port 8080 to the domain controllers in the Miami office.
D. Install Azure AD Connect on a server in the Miami office and enable Pass-through Authentication
E. Install the Active Directory Federation Services (AD FS) role on a domain controller in the Miami office.
Correct Answer: BD
Every Azure AD directory comes with an initial domain name in the form of domainname.onmicrosoft.com. The initial
domain name cannot be changed or deleted, but you can add your corporate domain name to Azure AD as well. For
example, your organization probably has other domain names used to do business and users who sign in using your
corporate domain name. Adding custom domain names to Azure AD allows you to assign user names in the directory
that
are familiar to your users, such as `[email protected]\\’ instead of \\’[email protected] name.onmicrosoft.com\\’.
Scenario:
Network Infrastructure: Each office has a local data center that contains all the servers for that office. Each office has a
dedicated connection to the Internet.
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com Planned Azure
AD Infrastructure: The on-premises Active Directory domain will be synchronized to Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-domain

QUESTION 13
You have an Azure subscription that contains the following resources:
a virtual network named VNet1
a replication policy named ReplPolicy1
a Recovery Services vault named Vault1
an Azure Storage account named Storage1
You have an Amazon Web Services (AWS) EC2 virtual machine named VM1 that runs Windows Server
You need to migrate VM1 to VNet1 by using Azure Site Recovery.
Which three actions should you perform in sequence? To answer, move the
appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Pass4itsure AZ-103 exam questions-q13

Correct Answer:

Pass4itsure AZ-103 exam questions-q13-2

Step 1: Deploy an EC2 virtual machine as a configuration server Prepare source include:
1.
Use an EC2 instance that\\’s running Windows Server 2012 R2 to create a configuration server and register it with your
recovery vault.
2.
Configure the proxy on the EC2 instance VM you\\’re using as the configuration server so that it can access the service
URLs.
Step 2: Install Azure Site Recovery Unified Setup.
Download Microsoft Azure Site Recovery Unified Setup. You can download it to your local machine and then copy it to
the VM you\\’re using as the configuration server.
Step 3: Enable replication for VM1.
Enable replication for each VM that you want to migrate. When replication is enabled, Site Recovery automatically
installs the Mobility service.
References: https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-aws-azure

Pass4itsure discount code 2020

Pass4itsure-discount-code-2020

az-103 pdf dumps (3.16) https://drive.google.com/open?id=19Coh2duUHRtgWifZBcT7r4fcTnagcS_a

az-103 pdf dumps https://drive.google.com/open?id=1CSJYCMCEsQBm3ZhWkOdSVLKg47zjuwF0

You can easily get our AZ-103 dumps and these dumps are in pdf format,easily. https://www.pass4itsure.com/az-103.html This is the highest rated Pass Guaranteed Exam 2020, it has 405+ exam questions with detailed instructions. Useful for your exam preparation.