What is the procedure to get a Cisco CCNA certification 200-105 dumps? Candidates for the Cisco Interconnecting Network Devices Part 2 certification exam are interested in demonstrating and understanding the installation, configuration, operation, and troubleshooting of small enterprise networks. pass4itsure cisco 200-105 (Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)) can help people maintain their livelihoods are basis of good quality education and specialized certification in this competitive contemporary world. Cisco recommends candidates have an understanding of network fundamentals, implementing local area networks, implementing Internet connectivity, managing network devices, securing network devices, and implementing basic IPv6 connectivity.
[Pass4itsure Cisco 200-105 PDF Dumps OFFER From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E
[Pass4itsure Cisco 300-115 PDF Dumps OFFER From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU
Do you offer free after-sale services?
Yes. We provide 7/24 customer help and information on a wide range of issues. Pass4itsure experts assess students’capability through 200-105 exams. pass4itsure 200-105 dumps pdf have remarkably contributed to a vital role in your life and also the improvement of your living standards. Our pass4itsure 200-105 dumps service is professional and confidential and your issues will be replied within 12 hous. 200-105 exam questions and answers are Printable in High Quality Study Guide that you can download in your Computer or any other device and start preparing your 200-105 exam. Feel free to send us any questions and we always try our best to keeping our Customers Satisfied. You can also get pass4itsure.com exam simulator to test your preparation.
What if I don’t pass the exam? How do I claim Refund?
Any Pass4itsure.com user who fails the corresponding exam has 30 days from the date of purchase of Exam on Pass4itsure.com for a full refund. We can accept and arrange a full refund requests only if your score report or any relevant filed be confirmed. You can print complete 200-105 dumps study guide, carry with you when you are at vacations or traveling and enjoy your exam prep.
Pass4itsure Latest and Most Accurate Cisco 200-105 Dumps Exam Q&As(4-11)
Question No : 4 – (Topic 1)
At which layer of the OSI model is RSTP used to prevent loops?
B. data link
200-105 exam Answer: B
Explanation: RSTP and STP operate on switches and are based on the exchange of Bridge Protocol Data Units (BPDUs) between switches. One of the most important fields in BPDUs is the Bridge Priority in which the MAC address is used to elect the Root Bridge, RSTP operates at Layer 2.
Question No : 5 – (Topic 1)
What is one benefit of PVST+?
A. PVST+ supports Layer 3 load balancing without loops.
B. PVST+ reduces the CPU cycles for all the switches in the network.
C. PVST+ allows the root switch location to be optimized per VLAN.
D. PVST+ automatically selects the root bridge location, to provide optimized bandwidth
Per VLAN Spanning Tree (PVST)
Per VLAN Spanning Tree (PVST) maintains a spanning tree instance for each VLAN configured in the network. This means a switch can be the root bridge of a VLAN while another switch can be the root bridge of other VLANs in a common topology. For example, Switch 1 can be the root bridge for Voice data while Switch 2 can be the root bridge for Video data. If designed correctly, it can optimize the network traffic.
Question No : 6 – (Topic 1)
Refer to the exhibit.
Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.)
A. SwitchA, Fa0/2, designated
B. SwitchA, Fa0/1, root
C. SwitchB, Gi0/2, root
D. SwitchB, Gi0/1, designated
E. SwitchC, Fa0/2, root
F. SwitchD, Gi0/2, root
200-105 dumps Answer: A,B,F
The question says “no other configuration changes have been made” so we can understand these switches have the same bridge priority. SwitchC has lowest MAC address so, it will become root bridge and 2 of its ports (Fa0/1 & Fa0/2) will be designated ports (DP). Because SwitchC is the root bridge the 2 ports nearest SwitchC on SwitchA (Fa0/1) and SwitchD (Gi0/2) will be root ports (RP) -> B and F are correct. SwitchB must have a root port so which port will it choose? To answer this question we need to know about STP cost and port cost. In general, “cost” is calculated based on bandwidth of the link. The higher the bandwidth on a link, the lower the value of its cost. Below are the cost values you should memorize: Link speed Cost SwitchB will choose the interface with lower cost to the root bridge as the root port so we must calculate the cost on interface Gi0/1 & Gi0/2 of SwitchB to the root bridge. This can be calculated from the “cost to the root bridge” of each switch because a switch always advertises its cost to the root bridge in its BPDU. The receiving switch will
add its local port cost value to the cost in the BPDU. SwitchC advertises its cost to the root bridge with a value of 0. Switch D adds 4 (the cost value of 1Gbps link) and advertises this value (4) to SwitchB. SwitchB adds another 4 and
learns that it can reach SwitchC via Gi0/1 port with a total cost of 8. The same process happens for SwitchA and SwitchB learns that it can reach SwitchC via Gi0/2 with a total cost of 23 -> Switch B chooses Gi0/1 as its root port. Now our last task is to identify the port roles of the ports between SwitchA & SwitchB. It is rather easy as the MAC address of SwitchA is lower than that of SwitchB so Fa0/2 of SwitchA will be designated port while Gi0/2 of SwitchB will be alternative port.
Question No : 7 – (Topic 1)
Which three of these statements regarding 802.1Q trunking are correct? (Choose three.)
A. 802.1Q native VLAN frames are untagged by default.
B. 802.1Q trunking ports can also be secure ports.
C. 802.1Q trunks can use 10 Mb/s Ethernet interfaces.
D. 802.1Q trunks require full-duplex, point-to-point connectivity.
E. 802.1Q trunks should have native VLANs that are the same at both ends.
Question No : 8 – (Topic 1)
What commands must be configured on the 2950 switch and the router to allow
communication between host 1 and host 2? (Choose two.)
A. Router(config)# interface fastethernet 0/0
Router(config-if)# ip address 192.168.1.1 255.255.255.0
Router(config-if)# no shut down
B. Router(config)# interface fastethernet 0/0
Router(config-if)# no shut down
Router(config)# interface fastethernet 0/0.1
Router(config-subif)# encapsulation dot1q 10
Router(config-subif)# ip address 192.168.10.1 255.255.255.0
Router(config)# interface fastethernet 0/0.2
Router(config-subif)# encapsulation dot1q 20
Router(config-subif)# ip address 192.168.20.1 255.255.255.0
C. Router(config)# router eigrp 100
Router(config-router)# network 192.168.10.0
Router(config-router)# network 192.168.20.0
D. Switch1(config)# vlan database
Switch1(config-vlan)# vtp domain XYZ
Switch1(config-vlan)# vtp server
E. Switch1(config)# interface fastethernet 0/1
Switch1(config-if)# switchport mode trunk
F. Switch1(config)# interface vlan 1
Switch1(config-if)# ip default-gateway 192.168.1.1
200-105 dumps Answer: B,E
The two answers B and E list all the commands needed to configure interVLAN routing. Please notice that Cisco switch 2950, 2960 only support dot1Q trunking so we don’t need to specify which trunking encapsulation to use in this case. For Cisco switches 3550 or above we have to use these commands instead: Switch3550(config-if)#switchport trunk encapsulation dot1q Switch3550(config-if)#switchport mode trunk
Question No : 9 – (Topic 1)
Which two of these statements regarding RSTP are correct? (Choose two.)
A. RSTP cannot operate with PVST+.
B. RSTP defines new port roles.
C. RSTP defines no new port states.
D. RSTP is a proprietary implementation of IEEE 802.1D STP.
E. RSTP is compatible with the original IEEE 802.1D STP.
The role is now a variable assigned to a given port. The root port and designated port roles remain, while the blocking port role is split into the backup and alternate port roles. The Spanning Tree Algorithm (STA) determines the role of a port based on Bridge Protocol Data Units (BPDUs). In order to simplify matters, the thing to remember about a BPDU is there is always a method to compare any two of them and decide whether one is more useful than the other. This is based on the value stored in the BPDU and occasionally on the port on which they are received. This considered, the information in this section
explains practical approaches to port roles. Compatibility with 802.1D RSTP is able to interoperate with legacy STP protocols. However, it is important to note that the inherent fast convergence benefits of 802.1w are lost when it interacts with legacy bridges.
Question No : 10 – (Topic 1) Refer to the exhibit.
A technician has configured the FastEthernet 0/1 interface on Sw11 as an access link in VLAN 1. Based on the output from the show vlan brief command issued on Sw12, what will be the result of making this change on Sw11?
A. Only the hosts in VLAN 1 on the two switches will be able to communicate with each other.
B. The hosts in all VLANs on the two switches will be able to communicate with each other.
C. Only the hosts in VLAN 10 and VLAN 15 on the two switches will be able to communicate with each other.
D. Hosts will not be able to communicate between the two switches.
200-105 pdf Answer: D
VLANs are local to each switch’s database, and VLAN information is not passed between
switches without implementing VLAN Trunk Protocol (VTP). Trunks carry traffic from all
VLANs to and from the switch by default but, can be configured to carry only specified
VLAN traffic. Trunk links are required to pass VLAN information between switches. So
Sw11 port should be trunk not access port. Additionally, there are no ports assigned to
Question No : 11 – (Topic 1)
What are two characteristics of a switch that is configured as a VTP client? (Choose two.)
A. If a switch that is configured to operate in client mode cannot access a VTP server, then the switch reverts to transparent mode.
B. On switches that are configured to operate in client mode, VLANs can be created, deleted, or renamed locally.
C. The local VLAN configuration is updated only when an update that has a higher configuration revision number is received.
D. VTP advertisements are not forwarded to neighboring switches that are configured in VTP transparent mode.
E. VTP client is the default VTP mode.
F. When switches in VTP client mode are rebooted, they send a VTP advertisement request to the VTP servers.
Server Mode Once VTP is configured on a Cisco switch, the default mode used is Server Mode. In any given VTP management domain, at least one switch must be in Server Mode. When in Server Mode, a switch can be used to add, delete, and modify VLANs, and this information will be passed to all other switches in the VTP management domain. Client Mode When a switch is configured to use VTP Client Mode, it is simply the recipient of any VLANs added, deleted, or modified by a switch in Server Mode within the same management domain. A switch in VTP client mode cannot make any changes to VLAN information. Transparent Mode A switch in VTP Transparent Mode will pass VTP updates received by switches in Server Mode to other switches in the VTP management domain, but will not actually process the contents of these messages. When individual VLANs are added,
deleted, or modified on a switch running in transparent mode, the changes are local to that particular switch only, and are not passed to other switches in the VTP management domain.
You can access updated pass4itsure 200-105 exam q&a from your online account anytime. This Cisco 200-105 dumps (Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)) exam is specialized in nature and the people should know about it. If you have taken ICND1v2.0 and/or ICND2v2.0 training but not the certification exam(s), you must do so by the dates above. If you want to test your skill and like to use your certification in the process of recruitment, pass4itsure Cisco 200-105 dumps is your option. If you wish to earn the CCNA Routing & Switching credential with v2 exams, you must pass both the ICND1v2.0 and ICND2v2.0 exams (when the ICND1 exam retires as a retired exam cannot be used to earn a CCNA certification). Sometimes you can get really frustrated due to failure of getting your job desires.
Do you provide free updates?
Once these dates are past, the Version 2 certification exams will no longer be available. Yes, once there are some changes on 200-105 dumps exam, we will update the study materials timely to make sure that our customer can download the latest edition. This will result in you needing to retake these training classes to pass the Version 3 exam. The updates are provided free for 120 days.
- 6000+ Exam Q&As
- 6000+ Free Demo
- 98% Pass Rate
- 100% Money Back Guarantee
- 365 Days Free Update
- 5 Years Working ExperienceInstant Download After Purchase
- 100% Money Back Guarantee
- 365 Days Free Update
- 70000+ Satisfied Customer
With much thorough analysis of the feedback from thousands of certified experts, we are able to determine which providers will provide you with updated and relevant Cisco 200-105 exam questions and which will offer your good quality 200-105 dumps questions for your 200-105 test. pass4itsure is an ideal platform which covers the entire course contents prepare you for the actual 200-105 exam. The The pass4itsure 200-105 dumps exams simulate your upcoming test, so repeated practice and success on the practice exams ensures success on the final exam. It provides you with the latest and relevant online exam material. You can look at the demo 100% free to check level of quality of products.
It has all the authentic material available for 200-105 exam. You can be brimming 200-105 dumps with confidence ,not only to improve your 200-105 dumps knowledge of the culture, a training tool prepared for the IT certification exams 200-105 dumps, you will be completely ready for the Cisco 200-105 dumps ,but also provide you one 200-105 dumps year free update service. pass4itsure offers genuine questions and answers of 200-105 exam. In general case, we will reply the customers’ letter in 2 hours or quicker. These kinds of material are available in PDF and VCE document files plus self-test models with 3 months 100% free update.
Helpful Pass4itsure Cisco 200-105 Dumps Practice, Real Cisco 200-105 Dumps Online Exam Online, We Help You Pass Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0). Pass4itsure 200-105 Dumps Exam Youtube Free Online Test Here:
Pass4itsure Promo Code 15% Off