How do I pass the Cisco 640-875 exam in 2020? There are many ways you can easily prepare for the 640-875 exam, or you can watch the review of the 640-875 exam online on our Pass4itsure. https://www.pass4itsure.com/640-875.html( Q&As: 257 )Pass4itsure offers the latest exam practice 640-875 dumps in video (YouTube)mode and PDF mode! Choose the best online resources for 640-875 exam preparation and you will succeed in the 640-875 exam.

Watch 640-875 exam practice questions online

Latest exam practice CCNA SP 640-875 PDF mode

Free Cisco CCNA SP 640-875 PDF Dumps Download(drive.google.com
)

https://drive.google.com/open?id=1I0easpp62iPn-BdkJBBdkHZaUj6w2_eX

You may also like… Other Cisco certifications.

You Should Go with Pass4itsure!

Get Cisco 640-875 Exam Dumps On Reasonable Price You Should Go with Pass4itsure!

Pass4itsure Features(2020)

Pass4itsure Features

Pass4itsure 12% ( Discount code2020PASS”)

Pass4itsure coupon

Latest 640-875 exam dumps – Here’s CCNA service provider 640-875 exam practice questions

In this rapidly changing world, CCNA service provider exam professionals should reliably seek preparation for their Cisco 640-875 exam questions. https://www.pass4itsure.com/640-875.html Satisfy you! Latest 640-875 Exam Questions & Answers.

Building Cisco Service Provider Next-Generation Networks Part 1 (SPNGN1)

640-875 SPNGN1
Certification: CCNA Service Provider
Duration: 90 minutes (65 – 75 questions)
Available languages: English

If you want to find more then just click on the link below: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/spngn1.html

QUESTION 1
Which three of the following components must be elected before the Spanning Tree Protocol can converge in a
switched LAN? (Choose three.)
A. Designated ports
B. Alternate ports
C. Converged ports
D. Root bridge
E. Root ports
F. Backup ports
Correct Answer: ADE

QUESTION 2
With IPv6, for which purpose are router solicitation and router advertisement used?
A. Routing protocol updates
B. Routing protocol neighbor peerings
C. Router and prefix discovery
D. Layer 3 to Layer 2 address resolution (similar to IPv4 ARP)
Correct Answer: C

QUESTION 3
What is the minimum version of DOCSIS that will support IPv6?
A. Version 1
B. Version 2
C. Version 3
D. Version 3.1
Correct Answer: B

QUESTION 4
Which Cisco IOS XR CLI command displays the running state of each line card (including the fan tray) on the Cisco
ASR 9000 Series Router?
A. RP/0/RSP0/CPU0:PE1#show platform
B. RP/0/RSP0/CPU0:PE1(admin)#show platform
C. RP/0/RSP0/CPU0:PE1#show hw-module fpd location all
D. RP/0/RSP0/CPU0:PE1(admin)#show hw-module fpd location all
E. RP/0/RSP0/CPU0:PE1#show version
F. RP/0/RSP0/CPU0:PE1(admin)#show version
Correct Answer: B

QUESTION 5
Which three physical lines can provide local or remote access to a Cisco router or switch? (Choose three.)
A. Console port
B. Modem port
C. Virtual terminal lines
D. Switch fabric interface
E. Aux port
F. ManagementEthernet0/RSP0/CPU0/0
Correct Answer: AEF

QUESTION 6
HOTSPOT

Pass4itsure 640-875 exam questions-q6

Pass4itsure 640-875 exam questions-q6-2

Pass4itsure 640-875 exam questions-q6-3

Pass4itsure 640-875 exam questions-q6-4

Hot Area:

Pass4itsure 640-875 exam questions-q6-5

QUESTION 7
DRAG DROP
Drag the Cisco IOS XR command mode from the left and drop it on the correct prompt on the right.
Select and Place:

Pass4itsure 640-875 exam questions-q7

Correct Answer:

Pass4itsure 640-875 exam questions-q7-2

QUESTION 8
If a bridge port is in the non-designated state, which two statements about spanning-tree operations on this port are
true? (Choose two.)
A. This port is in the Forwarding state.
B. This port sends BPDUs on the attached link.
C. This port has the lowest cost to the root bridge.
D. This port is considered the root port.
E. This port receives BPDUs.
F. This port is in the Blocked state.
Correct Answer: EF

QUESTION 9
What is the term that refers to a device that has no Customer Equipment directly connected to it in a Service Provider
network?
A. Provider Edge Router
B. Customer Edge Router
C. Non-customer Edge Router
D. Provider Router
E. Provider Edge Provider Router
Correct Answer: D

QUESTION 10
Given a ring topology, which loop prevention mechanism provides the fastest reconvergence time after a link failure?
A. Rapid Per-VLAN Spanning Tree Protocol
B. Resilient Ethernet Protocol
C. Multiple Spanning Tree Protocol
D. Spanning Tree Protocol
Correct Answer: B

QUESTION 11
This show output is from the S7 Cisco Metro Switch and the PE7 Cisco ASR 9000 Series Router.
Which configuration change(s) is/are needed to bring the S7 FastEthernet 0/2 interface into the up/up state?
S7#show cdp neighbors Device ID Local Intrfce Holdtme Capability Platform Port IDPE7 Fas 0/2 163 R ASR9K Ser Gig
0/0/0/0S78 Fas 0/23 146 S I ME-3400E- Fas 0/21S8 Fas 0/21 178 S I ME3400E- Fas 0/21 *Mar 20 21:28:02.177:
%ETHCNTR-3HALF_DUX_COLLISION_EXCEED_THRESHOLD: Collisions at FastEthernet0/2 exceed threshold.
Considered as loop-back.*Mar 20 21:28:02.177: %PM-4-ERR_DISABLE: loopback error detected on Fa0/2, putting
Fa0/2 in err-disable state*Mar 20 21:28:03.184: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/2, changed state to down S7#show interface fa0/2FastEthernet0/2 is down, line protocol is down (errdisabled) Hardware is Fast Ethernet, address is e8ba.70b5.6c04 (bia e8ba.70b5.6c04) MTU 1500 bytes, BW 10000
Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive
set (10 sec) Half-duplex, 10Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is
unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:40, output 00:00:00, output hang never Last
clearing of “show interface” counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate
0 bits/sec, 0 packets/sec 484423 packets input, 39349929 bytes, 0 no buffer Received 484423 broadcasts (167203
multicasts) 0 runts, 0 giants, 0 throttles 1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 167203
multicast, 0 pause input 0 input packets with dribble condition detected 972398 packets output, 128931949 bytes, 0
underruns 0 output errors, 46 collisions, 4 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no
carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out RP/0/RSP0/CPU0:PE7#show interfaces
gi0/0/0/0GigabitEthernet0/0/0/0 is down, line protocol is down Interface state transitions: 4 Hardware is GigabitEthernet,
address is 4055.392f.40a8 (bia 4055.392f.40a8) Internet address is 192.168.107.70/24 MTU 1514 bytes, BW 100000
Kbit (Max: 100000 Kbit) reliability 255/255, txload 0/255, rxload 0/255 Encapsulation ARPA, Full-duplex, 100Mb/s, THD,
link type is force-up output flow control is off, input flow control is off loopback not set, ARP type ARPA, ARP timeout 04:00:00 Last input 00:00:00, output
00:00:35
Last clearing of “show interface” counters never 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0
bits/sec, 0 packets/sec 972551 packets input, 128953765 bytes, 729 total input drops 172486 drops for unrecognized
upper-level protocol Received 0 broadcast packets, 800781 multicast packets 0 runts, 0 giants, 0 throttles, 0 parity 0
input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 484545 packets output, 39360900 bytes, 0 total output drops
Output 317283 broadcast packets, 167262 multicast packets 0 output errors, 0 underruns, 0 applique, 0 resets 0 output
buffer failures, 0 output buffers swapped out 4 carrier transitions
A.
Enable loopback line on the S7 Fa0/2 interface then shut and no shut the Fa0/2 interface.
B.
Enable duplex half on the PE7 Gi0/0/0/0 interface then shut and no shut the Fa0/2 interface on S7.
C.
Change S7 Fa0/2 interface to duplex full and speed 100 then shut and no shut the Fa0/2 interface.
D.
Just need to no shut the Fa0/2 interface on S7.
E.
Just need to shut and no shut the Fa0/2 interface on S7.
Correct Answer: C

QUESTION 12
Refer to the exhibit.

Pass4itsure 640-875 exam questions-q12

Company 1 has merged with Company 2. Company 1 is using RIPv2 as its IGP and Company 2 is using EIGRP as its
IGP. EIGRP also is running between R1 and R2 over the WAN link. Which action must be taken to allow these two
configurations?
The Company 1 RIP routes appear as external EIGRP routes within Company 2. The Company 2 EIGRP routes appear
as RIPv2 routes within Company 1.
A. Enable RIPv2 on the R2 router.
B. Enable RIPv2 on the R2 router and on all internal routers of Company 2. Enable EIGRP on all internal routers of
Company 1.
C. Configure mutual route redistribution between RIPv2 and EIGRP on the R1 and R2 routers.
D. Configure mutual route redistribution between RIPv2 and EIGRP on the R1 router.
E. Configure mutual route redistribution between RIPv2 and EIGRP on the R2 router.
Correct Answer: D

QUESTION 13
Refer to the exhibit.

Pass4itsure 640-875 exam questions-q13

Host 3 on Network A is sending data to Host 8 on Network B. Which address is the default gateway of Host 3?
A. The address of the switch interface that is connected to router interface Fa0/0
B. The address of the switch interface that is connected to router interface Fa0/1
C. The address of the host that is connected to Network A
D. The address of the host that is connected to Network B
E. The address of the router interface Fa0/0
F. The address of the router interface Fa0/1
Correct Answer: E

You are provided with the best and most updated 640-875 dumps, we also want you to be able to access them easily, whenever you want.